DuraSys RC-1400T C466 Rugged Portable Computer

Typical Data Acquisition or Server Configuration

Main Board:  PICMIG Socket 370, BX chipset for PII/III or Celeron processor, 100 MHz bus.

Processor:  Intel Celeron 466 with 128 K full speed cache memory. Bus set to 66 MHz.

Memory:  Four DIMM sockets, equipped with 64 MB PC100 SDRAM.

IDE Interfaces:  PCI Primary (2 drives), PCI Secondary (2 drives).

I/O Ports:  2 Fast UART serial, 1 EPP/ECP parallel, PS/2 mouse port, PS/2 keyboard, 2 USB.

Expansion Slots: Three PCI and one CPU. Four PCI/One CPU or Two PCI/Two ISA/One CPU optional.

Hard Disk Drive:  UDMA IDE 9 GB, <10 ms, 7200 RPM. 300 G shock, non-op. Others optional.

Floppy Drive:  One 1.44 MB floppy. Large capacity floppy or Zip optional.

Video: AGP 64 bit Accelerated 2D/3D SVGA, 4 MB memory, to 1280 x 1024 NI, on CPU board.

Network Interface: PCI, 10/100 Mbps, Bus Mastering, UTP, on CPU board.

Watchdog Timer: On CPU board.

Hardware Monitor: CPU and system temperature, voltage, and fan speed.

*Solid State Disk: 2-72 Mb, on CPU board, optional.

*Audio: On CPU board, optional.

*SCSI: On CPU board, optional.

Software:  Windows 98SE. Windows NT4 or Windows 2000 optional. All patches applied.

Power Supply:  90-132, 190-264 VAC, 49-61 Hz; 100 W. -48 VDC input, ask.

Case:  Aluminum, 8.25"H (mount in 5U) x 4.37"W x 16.5"D. One hard drive and one floppy mounting location. Filtered fan for positive pressure cooling, removable top lid. Rackmount kit available.

Weight: 9 pounds!

Environmental:  Operating Temp: 0-50 degrees C

        Storage: -20 to 75 degrees C
        Humidity: 10-90% RH, non-condensing

Finish: Black, or color and marking to customer specification.

* indicates optional.